stainless steel cartridges in either a double
open ended or 1” NPT connection configuration. The 316 stainless steel housing comes
standard with a Buna N housing seal to
provide strength and dependability. Other
seals and O-rings are available to support
applications requiring higher temperature
or corrosion resistance. The 7710 Series filters are designed for maximum operating
pressures of 300 psi (housing) and include
a ¼” NPT housing drain, ¼” NPT gauge ports
and 1” FNPT line connections. Outside-In
filter area is 0.54 ft2. Each porous metal filter
element is 100% leak tested to bubble point.
Mott www.mott.com +1 860- 747-6333.
Back Pressure Regulator
The Marsh Bellofram
BelGAS P289 back pressure
regulator functions as
a high flow relief valve
with an adjustable set
point. The P289 can
be used in place of a
standard relief valve
to provide protec-
tion against over
pressurization
in the downstream system.
With its large
diaphragm area
and integral Pitot tube
booster, the P289 is
designed for response to
excessive pressure relief
requirements, particularly
within low-pressure settings. Optional regulator rebuild kits are also available. Marsh
Bellofram Corporation
www.marshbel-lofram.com +1 304-387-1200
Industrial Gas System
Thermo Fisher Scientific announced
enhancements to its Antaris Industrial Gas
System (IGS) that improve performance,
speed, ease-of-use and sensitivity. The
Antaris IGS now offers faster scan speeds (to
5 Hz at 0.5 cm-1 resolution) and enhanced
electronic and communication capabilities
to support more rapid scanning. Based on
the Nicolet 6700 Fourier transform interferometer, the Antaris IGS is an FTIR-based
analyzer capable of monitoring dozens
of gases simultaneously while providing
accurate and fast multi-component gas
analysis. The Antaris IGS is configurable,
offering a choice of detectors, gas cells and
other components that enable users to
tailor the system to fit the needs of a range
of gas analysis applications. The analyzer is
available in both industrial rack-mount and
table-top configurations, and it can be used
as a standalone unit or be incorporated
into a larger gas analysis system. Thermo
Fisher Scientific www.thermoscientific.
com +1 800-532-4752
Portable Calibration Unit
The portable calibration unit (PCU) from
Alicat Scientific integrates three Alicat laminar mass flow meters into a portable unit.
The PCU is designed for use in laboratories,
industrial plants, process facilities and by
field technicians to verify proper operation
of flow meters and flow controllers from any
manufacturer. The PCU is self-contained and
WHO NEEDS
D
Cylinders?
Get more gas in a smaller, friendlier cylinder
The exclusive 66 from Gasco delivers 8 more
liters of precision calibration gas and is 40%
smaller than a 58-liter cylinder.
• Light, convenient, agile
• 10% more capacity, lasts longer
• Fits in standard carrying case
• Available in disposable and ecosmart refillable
Call your Gasco distributor now to learn
more about the 66 and ecosmart 66.
To find a Gasco distributor near you,
call 800-910-0051.
